{"id":14570,"date":"2022-04-22T03:23:41","date_gmt":"2022-04-22T03:23:41","guid":{"rendered":"https:\/\/zlqu95mfyr.wpdns.site\/?p=14570"},"modified":"2022-04-22T03:39:29","modified_gmt":"2022-04-22T03:39:29","slug":"how-to-make-sure-the-safety-of-hydraulic-press-brakes","status":"publish","type":"post","link":"https:\/\/www.avido.cn\/cs\/how-to-make-sure-the-safety-of-hydraulic-press-brakes\/","title":{"rendered":"How to Make Sure The Safety of Hydraulic Press Brakes"},"content":{"rendered":"\n

<\/span>Estimated reading time: <\/span>2<\/span> minute<\/span><\/p>\n\n\n\n

1. Protection Grating<\/h3>\n\n\n\n

Safety fences can be added to the front and rear of the hydraulic press brakes. Such as below left and right protection grating.<\/p>\n\n\n\n

\"Protection<\/figure><\/div>\n\n\n\n

2. Light Curtain Protection<\/h3>\n\n\n\n

The photoelectric light curtain protection generates a protective light curtain by emitting infrared light. When the light curtain is blocked, the device sends out a blackout signal to control potentially dangerous machinery and equipment to stop working and avoid safety accidents.<\/p>\n\n\n\n

\"Light<\/figure><\/div>\n\n\n\n

3. Security Valve<\/h3>\n\n\n\n

A hydraulic security valve is a kind of safety protection valve, it’s opening, and closing parts are under the action of external force in a normally closed state, when the equipment or pipeline medium pressure rises, more than the specified value automatically opens, by discharging media to the system to prevent the pipeline or equipment in the medium pressure exceeds the specified value. The safety valve belongs to the automatic valve category, control pressure does not exceed the specified value, for personal safety and equipment operation plays an important role in protection. When something will break down the press, the slide could not fall.<\/p>\n\n\n\n

4. Laser Protection<\/h3>\n\n\n\n

The bending machine<\/a> protection device<\/a> is mainly set up near the tip of the upper die of the bending machine to protect the area, forming a laser protection area at 2-3 mm below the upper die. In the process of bending machine use, the bending machine protection device luminous and light receiver can move with the upper die, always and the upper die to maintain the bending machine on the bending machine plus bending machine protection device will not have any impact on the bending machine production, if a worker’s finger into the protection area, it will block the light beam, the bending machine will immediately stop, effectively preventing the occurrence of finger crushing accidents.<\/p>\n\n\n\n

\"Laser<\/figure><\/div>\n\n\n\n
\n