63T Puncher Machine For Sale

A puncher machine is a modern machine for punching and embossing sheet metal. Compared with traditional machinery, it has higher efficiency, lower technical requirements for the operator. It is an indispensable part of the production, as well as the press brake and shearing machine.

Principle of door steel punching machine

63T Puncher Machine, The principle of the power press is to convert the circular motion into a linear motion. Firstly the main motor outputs the force, and drives the flywheel and the gear, then running through the crankshaft, connecting rod, etc to achieve the linear motion of the slider. There is a circular motion from the main motor to the connecting rod door frame punch.

63T Puncher Machine, The transition point between circular motion and linear motion is between the connecting rod and the slider. Generally, there are two kinds of mechanisms here, 63T Puncher Machine. one is a ball type and the other is a cylindrical type, which converts to linear motion of the slider. The power press punches the material to deform it and obtain the required shape with high accuracy. 63T Puncher Machine, Therefore, a set of dies (including upper and bottom dies) must be matched to place the material, and the machine force to deform it.

Main features of door steel punching machine

1 With an inclinable cast structure, the machine body can incline to allow a punched workpiece or waste material to slide down from the die door frame punch.
2 With a rigid turn-key clutch, the press has single or continuous operation standards.
3 The punch press uses a single-type brake. The sliding block is equipped with a press-down type safety device that can be pressed down to protect the entire machine.
4 Avoid being damaged in case of overpressure.
5 The machine has the advantages of high universality, high precision, reliable performance, and convenient operation.