Tempo estimado de leitura: 10 minuto
The Definition of Gmoça Dchãos
UMA porta de vidro is a relatively special kind of porta, first of all, it is not thick enough to say that it is a solid door, and it does not belong to the shaped door it is a – a special form of door. The characteristics of the glass door are determined by the characteristics of the glass itself. For example, when tempered clear glass is used, the door has a transparent function, while when frosted glass is used, it has a semi-translucent function.
The Characteristics of Frameless Gmoça Dchão UMAnd Framed Gmoça Dchão
Frameless glass and framed glass, are two different materials, generally, like framed glass selection are ordinary glass, ductility and stability are poor, it is easy to external forces or even thermal expansion and contraction caused by the bursting phenomenon.
Frameless glass is toughened glass, and when it breaks it turns into tiny particles that are less likely to cause harm to humans. It is also because it is frameless that one of the biggest benefits of using frameless glass for encapsulated balconies is that the view is open and not blocked like framed glass. Moreover, the appearance is beautiful and from a distance, it looks as if no glass window has been installed and its light is much brighter. This is something that framed glass windows cannot match.
Another thing that puts framed glass windows to shame is that frameless glass windows open and close in a folding fashion, meaning that even though they encase the balcony, they can be opened almost completely, as if they were not encased. With framed windows, on the other hand, they often only open halfway.
The most important thing about frameless windows is that some of them have an extruded seal. It is therefore airtight, and because it is frameless, it also uses a folding opening and closing method, so there is a small gap between the pages of the window. Due to the dense strong, not only is it possible to better protect the hygiene within the home but also to prevent rainwater from flowing into the balcony; it has good sound insulation, especially in houses near the road, this aspect of the trouble will be even better solved. This aspect proves that frameless glass windows have an advantage over framed glass.
The Installation of Framed Gmoça Dchão
- The installation of fixed partition walls should be carried out after the construction of other processes at the interior is completed. Fixed glass partitions and movable glass doors must be uniformly placed and positioned, according to the requirements of the design drawings to put out the positioning line of the partitions and glass doors, determine the location of the door frame, accurately measure the ground elevation and the elevation of the top of the door frame.
- Installation of glass partitions, door top limit slot width should be greater than the glass thickness of 2 ~ 4mm, slot depth between 20 ~ 30mm, to inject glue. The installation method can be led by the centerline of the bullet two metal decorative plate edge line, and then according to the edge line for the installation of the door frame top limit slot. The wooden spacers in the slots are used to adjust the depth of the slots. Adjustment is made by increasing or decreasing the number of pads.
- Installation of wooden bottom brackets for metal finishes. Installation method can be nailed square wood on the original pre-built wooden tiles, or through expansion bolts nailed square wood, the square wood fixed on the ground, and then use universal glue to stick the metal trim panel on the wooden square. Aluminum square tube, available aluminum angle fixed in the frame column, or with wood screws fixed in the ground buried in the wood tiles.
- Installation of a firm to the door frame. Nail the door frame square according to the centerline, then use plywood to determine the shape of the door frame column size and position of the fixed (note that the decorative surface size should be subtracted). Finally, when wrapping the metal decorative surface, place the trim facing joints in the middle of both sides of the glass installation. The joints must be accurately positioned and guaranteed to be vertical.
- Glass installation. Use the glass sucker (or glass sucker machine) to suck the thick glass tightly, and then hand-hold the sucker to lift and erect the thick glass plate through 2 to 3 people and move it to the installation site ready to be positioned. Positioning method: the upper part of the glass should be inserted into the top of the door frame limit slot, and then the lower part of the glass is placed on the bottom bracket to align the center line, and the installation position of the door frame on both sides, so that both sides of the thick glass just seal the metal trim of the door frame facing the seam opening, requiring that the trim seam opening is invisible both inside and outside.
- Glass fixed. At the bottom of the wood on the inside and outside of the nail two flat square wooden strips to thick glass in the middle, but from the thick glass plate need to leave a gap of about 4mm, and then in the flat square wooden strip painted universal adhesive will be decorated with metal plate sticky card in the square wood and two flat square wooden strip.
7. Inject glass glue to seal. At the top of the root bit slot on both sides of the gap and the bottom bracket glass slot on both sides and thick glass and door frame column of the pair of joints injected glass glue. The order of injection should start from the end of a gap to the end of the termination, without stopping in the middle. The key to the operation is: hold the pressure handle of the seam gun with even force, while moving along the seam at an even speed, i.e. with the glass glue extrusion, moving the injection port at an even speed, so that the glass glue in the seam to form a uniform straight line. Finally, use the plastic sheet to scrape off the excess glass glue and wipe the glue with a clean cloth.
8. Butt joint between the glass. Fixed part of the thick glass plate, due to the width of the size is too large, must be used for two or more than two pieces of assembled and made, two aligned splicing is bound to form a seam, butt joints should be left 2 ~ 3mm distance (butt joints of the glass cut must be inverted with). After the glass is fixed, use glass glue into the gap, filled with the same plastic sheet to scrape the glue flat, so that the gap forms a clean even straight line, the glass surface to wipe clean with a clean cloth glue stains.
The Installation Method of Frameless Gmoça Dchão
- The installation of fixed partition walls should be carried out after the construction of other processes at the interior is completed. Fixed glass partitions and movable glass doors must be uniformly positioned, according to the requirements of the design drawings to put out partitions and glass doors J positioning line, determine the position of the door frame, accurately measure the ground elevation and the top elevation of the door frame.
2. Installation of glass partitions, door top limit slot width should be greater than the glass thickness of 2 ~ 4mm, slot depth between 20 ~ 30mm, to inject glue. The installation method can be led from the center line of the bullet two metal decorative plate edge line, and then according to the edge line] frame top limit slot installation. A wooden spacer in the slot is used to adjust the depth of the slot. This is adjusted by increasing or decreasing the number of pads.
3. Installation of the wooden bottom bracket for the metal finish. Installation method can be in the original pre-buried wood tiles _ nail square wood, or through the expansion, bolts nail square wood, the square wood fixed in the ground, and then use the better glue will be metal trim panel glued to the wood square. Aluminum square tube, available aluminum angle fixed in the frame column, or with wood screws fixed in the ground buried in the wood tiles.
4. Install the door frame to the door. Nail the door frame according to the center line. Square wood, then use plywood to determine the frame column shape size and position of the fixed (note that should be subtracted from the size of the decorative surface). Afterward, wrap the metal decorative surface, wrap the decorative surface to place the facet joint in the middle of both sides of the glass installation. The joints must be accurately positioned and guaranteed to be vertical.
5. Glass installation. Use the glass sucker (or glass sucker machine) to suck the thick glass tightly, and then hand-hold the sucker to lift and erect the thick glass plate through 2 to 3 people to move it to the installation site ready to be positioned. In-place method: the upper part of the glass should be inserted into the door frame at the top of the limit slot, then the lower part of the glass put into the bottom bracket on the center line, and the door frame on both sides of the installation position, so that both sides of the thick glass just seal the door] frame of the metal trim facing the seam, required to do inside and outside are invisible trim seam.
6. Glass fixing. In the bottom of the wood on the inside and outside of the nail two flat square wooden strips to thick glass in the middle, but from the thick glass plate need to leave a gap of about 4mm, and then in the flat square wooden strip. Paint a better glue on the decorative metal plate sticky card in the square wood and two flat square wooden strips.
7. Butt the glass together. Fixed part of the thick glass plate, due to the width of the size is too large, must be used in two or more than two pieces of assembled and made, two aligned splicing is bound to form a joint, butt joints should be left 2 ~ 3mm distance (butt joints of the glass cut must be inverted with). After the glass is fixed, use glass glue into the gap, filled with the same plastic sheet to scrape the glue flat, so that the gap forms a clean even straight line, the glass surface to wipe clean with a clean cloth glue stains.
I like the frameless door, it’s suitable for my office. How much is it?
Hello sir, could you please tell us more sizes, we will send quotations for you by email, thank you